HELP
An object that generates an audible tone.

USE
Use Beep to generate a tone of a specified
frequency, duration, and volume.

LOCATION
Display ==> Beep

OPEN VIEW PARAMETERS

* Frequency (Hz) - The frequency of the tone
in Hertz.  Default is 1000 Hz.

* Duration (sec) - The time in seconds for
the tone to last.  Default is 0.1 sec.

* Volume (0-100) - The relative volume of the
tone, where 0 is silent and 100 is the
loudest.  Default is 80.

All of the three open view parameters can
be added as data input terminals.

NOTES
A Frequency or Volume value less than or
equal to zero will pause for the specified
duration.

The Beep object may complete execution
(activate its sequence output pin) before a
long duration tone has completed.  Execution
of subsequent Beep objects, however will
pause model execution until the previous tone
has completed.

The functionality of the Beep object is
hardware dependent.  In some cases, one or
more of the open-view parameters may not
affect the actual tone generated.  Also, some
computers do not have internal speakers and
may require an external speaker module.
Refer to your computer owner's manual for
information about its audio output
capabilities.
