HELP
An object that graphically displays a Scalar
numeric value.

USE
Use VU Meter to display a value on an analog
scale and digital numeric field.  

LOCATION
Display ==> VU Meter

The value of the input is displayed at the
bottom of the meter.

OBJECT MENU
* Clear At PreRun - Clears the displayed
value when the model or thread is PreRun.

* Clear At Activate - Clears the displayed
value when the UserObject is activated.

* Sub-Range Config - Sets different colors
(green, yellow, and red) for different ranges
of the display.  The color ranges overlay
each other with red on the bottom and green
on top.  This allows red sub-ranges at each
end of the scale.

* Number Formats - Specifies a different
display format than the global format.

NOTES
The upper and lower limits of the meter are
set by clicking on the present value and
typing in a new value.

The input data must be Scalar and able to
be converted to Real (Complex, PComplex,
Spectrum, and Coord must be first "unbuilt".)

These values may also be added as control
inputs.  

SEE ALSO
AlphaNumeric, Logging AlphaNumeric, and
Number Format.
