HELP
Outputs the contents of the HP VEE window to
a printer or a print file.

USE
Use Print Screen to get hardcopy of the
portion of your model that is visible on your
screen.  Print Screen displays a dialog box
that specifies information about the output.

LOCATION
File ==> Print Screen

DIALOG INFORMATION
The dialog box shown is the Printer Config
dialog box.  The following fields are
displayed:

* Graphics Printer - Allows you to select
from the set of printers configured on your
system for graphics.  You may also use the
default printer.

* Printer Type - Identifies the particular
type of printer being used for graphics
printing.

* Magnification - Allows you to select
enlargement or reduction of the graphic being
printed.  A value of 1 generates the same
physical size print on paper as is viewed on
the screen, if the printer allows it.  A .5
reduces the graphic to half the screen size.

* Darkness - Allows you to select the
intensity of print you want, either light,
medium, or dark.

* Landscape - Allows you to select the
landscape (horizontal) presentation of
graphics.

NOTES
Print Screen takes a few moments to capture
the image in the window.  While the image is
being captured, the pointer changes to an
hourglass.  You can't use HP VEE until the
capture is completed (the pointer changes
back to an arrow).

If you print to a file, you may print that
file using the HP-UX lp -oraw command.

The size of the HP VEE display window
determines the size of the print area.  To
get a large output, maximize the HP VEE
window (but too large an image gets clipped).
Larger images take longer to scan and print.

HP VEE only saves one configuration for
printing.  It can be set with Printer Config,
Print All, or Print Screen.

If HP VEE prints to a file, you can print
it by converting it to PCL and then using the
HP-UX lp -oraw command.

SHORT CUTS
Use [Shift-Print] with the options specified
in Printer Config, allowing the printing of
current open dialog boxes.

SEE ALSO
Print All and Printer Config.
